Click here for the ZTE F8648P Installation Guide.
The colours of each LED light on your ZTE F8648P Optical Network Router (ONR) have different meanings. Use this guide to understand more.
POWER LED:
- No light: No power is supplied to the ONR.
Check the power supply and ensure that the power adapter is secured.
- Green: ONR is powered on. The LED displays amber first, then flashing green, and turns steady green.
- Amber: ONR start-up failed.
- Blinking Amber: New firmware downloading
- Green (Blinking): Rebooting/restarting in progress.
PON:
- No light: No light source detected
- Blinking Green: ONR ranging
- Green: ONR has ranged successfully
AUTH:
- No light: ONR is not authorized/authenticated
- Blinking Green: ONR ranging/ synchronizing
- Green: ONR is authorized/authenticated.
LAN 1-4:
- No light: No ethernet connection.
- Green: Connected to an ethernet device.
- Blinking Green: Data is transmitting or receiving between devices.
10G LAN:
- No light: No ethernet connection.
- Green: Connected to an ethernet device.
- Blinking Green: Data is transmitting or receiving between devices
LAN 1-2:
- No light: Telephone is down
- Blinking Green: Telephone is up and the phone is off the hook or ringing
- Green: Telephone is up
IPTV:
- Green: Singtel TV connection is working
- Blinking Green: Singtel TV connection unable to obtain IP address
- No light: No Singtel TV Set-top Box detected
Internet:
- Green: Internet connection is up.
- Blinking Green: Active Internet traffic.
- No light: Internet service is down.
